|
 |
High Impact ProGlide®
ATI High Impact Powerglide Transmissions are recommended for vehicles that produce more than 1500 HP and need the added reliability offered by these heavy-duty gear combinations. Different types of gears and configurations are offered to match the needs of very high output engine combinations. High Impact Transmissions are built with many other components as “standard equipment” that would usually be needed with high horsepower combinations.
|
|
|
|
|
|
|
Straight Cut Gear Sets
9310 or VASCO Extreme Duty Straight Cut Gear Set, New Precision Balanced Carrier & 4340 Output
|
|
Billet Trans Brake
Wicked Quick™ Billet
Aluminum Safety
Reverse Trans Brake
Valve Body |
|
Aluminum Super Pump
Aluminum Super Pump with
bolt-in Stator for Ringless Shaft |
|
Lightweight Clutch Drum
10 Clutch
Lightweight High
Gear Drum |
9310 Heavy Duty Gears - from 1700 to 1900 HP
| Description |
Gear Ratio |
Gear Material |
Length |
HP Rating |
Part # |
Price |
| HIGH IMPACT w/ ATI SUPERCASE |
1.80 |
9310 |
28" |
1700 HP |
201435 |
$5,795 |
| HIGH IMPACT w/ ATI SUPERCASE |
1.80 |
9310 |
18" |
1700 HP |
201436 |
$5,795 |
| HIGH IMPACT w/ ATI SUPERCASE |
1.58 |
9310 |
28" |
1900 HP |
201445 |
$6,995 |
Vasco Extreme Duty Gears - up to 1900 HP
| Description |
Gear Ratio |
Gear Material |
Length |
HP Rating |
Part # |
Price |
| HIGH IMPACT w/ ATI SUPERCASE |
1.80 |
VASCO |
28" |
1900 HP |
201437 |
$5,995 |
| HIGH IMPACT w/ ATI SUPERCASE |
1.80 |
VASCO |
18" |
1900 HP |
201438 |
$5,995 |
| HIGH IMPACT w/ ATI SUPERCASE |
1.64 |
VASCO |
28" |
1900 HP |
201444 |
$5,995 |
Available Options - Prices listed below are available only at the time of
order or while your transmission is being built.
|
| Aluminum Roller Bearing Governor Support |
200038 |
$119 |
| Roller Bearing Extension Housing |
200031 |
$179 |
| Vasco Input |
207146 |
$149 |
| Super Pump and High Flow Filter Kit |
205032 / 203564 |
$239 |
| High Flow Filter Kit |
203564 |
$46 |
| Twin Seal Servo, Billet ATI cover w/ARP Bolts |
205318 / 205325 |
$89 |
| Gapless Servo Rings |
205319 |
$16 |
| Billet Alum Clutch Hub for use with 200110 |
207210 |
$19 |
| SCS-30 Cooling System |
925000 |
$795 |
| Super Band |
205291 |
$115 |
| Super Band, red |
205292 |
$115 |
| Alum 7 Clutch Drum with steel insert, includes red band |
205652 / 205310 |
$119 |
| Pro Style Safety Rev. Transbrake |
203050 |
$75 |
| “Wicked Quick” Billet Alum. Valve Body |
203051 |
$229 |
| Super F - Max Duty 30W - Case Quarts |
100021-12 |
$179 |
| Super F - Max Duty 30W Gallon
Bottle |
100024 |
$57 |
| Super F - Ultra Duty 50W - Case Quarts |
100025-12 |
$191 |
| Super F Fluid - Gallon
Bottle |
100004 |
$49 |
| Super F Fluid - 1 Case of
12 Quarts |
100001‑12 |
$155 |
| Aluminum Sheet Metal Pan |
203610 |
$122 |
|
|
| Quick Connect Cooler Lines |
925170 |
$126 |
| 1/4 NPT to -6 AN Fittings - Supercase only (2 required) |
960002 |
$15 |
| Locking Trick Stick, standard length |
206490 |
$52 |
| Locking Trick Stick, short for dragster use |
206491 |
$52 |
| Lokar® Direct Mount Stick, short |
206492 |
$153 |
| Lokar® Firewall Mount Stick |
206483 |
$216 |
| Energy Suspension Polyurethane Mount |
206621 |
$33 |
| Transmission
Overflow Can |
206611 |
$139 |
Optional SuperCase Bell Packages
| SB Mopar |
202800 |
$599 |
| SB Mopar, Gen III HEMI |
202801 |
$539 |
| SB Mopar, Gen III HEMI - Dual Starter Pockets |
202805 |
$599 |
| BB Mopar, 6-Bolt |
202802 |
$489 |
| BB Mopar, 8-Bolt |
202803 |
$539 |
| SB Ford, 157T |
202810 |
$499 |
| SB Ford, 164T |
202811 |
$499 |
| SB Ford, Mod Motor |
202812 |
$509 |
| SB Ford, 5.0L Coyote |
202815 |
$529 |
| SB Ford, 7.3L Godzilla |
202816 |
$529 |
| BB Ford, 164T INT |
202813 |
$489 |
| Toyota Supra - Requires custom converter |
202820 |
$489 |
|
| CRITICAL
LOW GEAR BAND ADJUSTMENT - To keep your ATI Steel Drum Powerglide trans in good
working order, you must keep the band adjustment in
check. 80 inch lbs - back out 3.5 turns! For Aluminum Drums, 80 in lbs - back out 4.5 turns
For Pro Glide®
and High Impact Transmissions: Adjust at the end of
each race day, or every five passes, when unit is new.
Once you check and there is little to no change then
check it every 25 passes.
For Superglide® Transmissions: Check and adjust
the band after each pass (especially important when
brand new). Once the band stops changing then check
at the end of each race day or after 8 rounds. This
will vary with HP as Superglide units are rated from
2000 to 3500 HP. Just remember five minutes of maintenance
here will help the low gear band do its job. Call a
Sales Technician for more info. |
|
|
|
|
