|
|
| |
|
Super Damper® Harmonic Dampers
|
|
Oldsmobile Super Dampers
The patented ATI Super Damper is designed
exclusively for high performance engines.
- Eliminates torsional crankshaft vibrations
- Exceeds SFI 18.1 specs
- Laser etched 360° timing marks
- Black zinc chromate finished
Inner and outer shells are available in aluminum or steel
contain the steel inertia weight. The inertia weight has
six (2-ring design) or eight (3-ring design) computer
machined grooves to retain the proper durometer O-rings
(dyno tested for each application).
|
|
STEEL
SHELLS |
ALUMINUM
SHELLS |
CRANKSHAFT
HUBS
|
7.074"
OD |
6.325"
OD |
7.074"
OD |
3
RING |
3
RING |
STEEL |
TOTAL WEIGHT
INERTIA WEIGHT |
8.75
lbs
4.50 lbs |
6.00
lbs
2.40 lbs |
6.25
lbs
4.50 lbs |
| DAMPER
ONLY LESS HUB PART NUMBERS |
CHEVROLET
FRONT |
917010 |
918940 |
917030 |
|
| INTERNAL
BALANCE DAMPERS |
| OLDSMOBILE
V8 267-455 |
917830 |
917831 |
917840 |
916760 |
| EXTERNAL
BALANCE DAMPERS |
| OLDSMOBILE V8 267-455
[1] |
918480
|
|
|
916760 |
[1] Timing cover may need to be
machined for clearance.
| |
How
to read this chart |
 |
- Locate the correct manufacturer's chart
- Choose the specific engine application
listed down the left side of the chart
- Determine if the damper needs to be internally
or externally balanced ( external balance dampers are constructed
of steel only). Black bars that extend horizontally across
the entire chart designate these sections
- Determine if you need steel or aluminum
shells. Labels for this information are listed across the
top of the chart in columns 2 and 3.
- Once you have determined the shell material,
you need to find the outside diameter (OD) of the desired
steel or aluminum shell. Then choose between 2 or 3 rings
and the desired weight of the damper.
- From the far right section of the chart,
select either a steel or aluminum hub for your desired engine
application. To determine the correct damper assembly part
number that intersects is the correct damper assembly.
- Assembly part numbers that are color
coded correspond to the pulley mount bolt pattern listed
near the top of the charts.
|
|
|
|
|
| |
|
|
