| The SCS-30 Cooling
System allows you to keep your transmission fluid
cool—with your engine turned off! It functions
exactly like your engine is running, completing
the cooler circuit normally supplied by the transmission
pump, into the converter, out to the cooler and
back to the transmission moving 30 gallons of
hot fluid an hour through your fan mounted oil
cooler. The system will completely cool your transmission
and converter between rounds to increase consistency
and reliability, while an optional sensor allows
drivers to set a preset temperature for the SCS
to cool to. It also allows racers click to neutral
in the traps and kill the motor without loosing
critical transmission lube pressure.
The SCS-30 allows you to:
- Fill your transmission, converter, cooler
and lines without starting your engine.
- Click neutral in the traps and kill the motor
without loosing critical lube pressure to the
transmission!
- Begin moving the super hot oil sitting in
your converter through your cooler immediately
after shut down.
- Completely cool your transmission and converter
between rounds to ambient, or your predetermined
temperature in 30 minutes or less. Allows you
to go to the starting line with the same transmission
and converter temperature every round!
- You can completely change the oil in your
transmission and flush your converter in minutes
without removing the transmission pan.
- The system is completely contained inside
the transmission with nothing external to leak.
- The system functions exactly like your engine
is running, completing the cooler circuit normally
supplied by the transmissions pump, into the
converter, out to the cooler and back to the
transmission.
| Features
of the SCS-30 Cooling System |
- Heavy duty 12v motor
mounted on the transmission.
- Heavy duty, extreme temperature,
all metal gear pump
- Rugged 10mm timing belt
driving HTD toothed pulleys
- Teflon lined, stainless
braided lines with AN fittings.
- The lower case fitting carries oil coming
out of the converter going to the cooler.
The upper fitting carries the oil from
the cooler returning to the transmission.
- 12 volt fan cooled oil
cooler or use your existing cooler.
- Custom valve body kit
or drill and tap your existing valve body.
- Can be installed on any
ATI® Powerglide transmission or SuperCase®.
- Available factory mounted
on any new ATI® Powerglide transmission
or ATI SuperCase. Can also be installed
on any ATI SuperCase-equipped Powerglide
transmission when returned to ATI for
overhaul.
- Remote system coming
soon!
- Kits include all hardware:
brackets, motor, pump, fittings and hoses.
|
PATENT PENDING
|
External Pump
Motor |
 Internal
cooler lines |
|
